0 $0.00
items in your cartto quote Checkout
Ooops no items were found.
Try something else.
Ok
Loading…

Pro-Shield Thermal Hanger Shield

Pro-Shield Thermal Hanger Shield

Item Code: Pro Shield
Pro-Shields are 360° thermal hanger shields designed to meet the broadest range of pipe support applications. They provide a continuous section of insulation with factory-applied jacketing meeting ASTM E 96A (maximum 0.02 perm) through a wide variety of pipe hangers for pipe systems operating between +20° F. and +1200° F. The insulation and jacketing extend beyond the galvanized steel shield for a neatly sealed joint with the adjoining insulation. Pro-Shields are suitable for use in any type of clamp as well as in band-type hangers and on flat surfaces. To assure proper support in all situations, high-density 450 PSI inserts are installed in units for 10” pipe with 1” insulation thickness and in all units for 12” pipe and larger. Pro-Shields meet the MSS standard for a Type 40 shield per MSS SP-58, Paragraph 7.63 – 7.66. Pro-Shields Meet ASTM E84 Standards Flame Spread-5-, smoke developed-5-. Rounded shield corners on all commercial size units.

Applications
  • For indoor use on clamping support systems, flat surfaces, clevis or other band-type hangers (see WeatherShield Upgrade submittal for outdoor use).
  • Pipe sizes 16 inch and larger in clevis or two bolt hangers only.
  • Chilled to steam piping and dual temperature lines.
  • Hanger spans per MSS SP-58 Table A3.
  • Available for pipe 1/2 inch through 24 inches, insulation thickness 1/2 inch (to 6” pipe) through 4 inches.
  • Pro-Shield can be made to fit Aquatherm / Metric piping.

Materials/Construction
  • 100 PSI Calcium silicate meeting ASTM C-533 Type 1, C-585, C-795, E-84, Thermal Conductivity (‘k’)=.40 @ 75° F.
  • Adhesive complying with NFPA 90-A, ASTM E-84
  • G-90 Galvanized steel shield, small check per ASTM A-653 (replaces A-527). Rounded corners for safety.
  • Factory applied jacketing meeting ASTM E 96A (maximum 0.02 perm), ASTM D-774, D-828 and E-84,
  • Structural insert (12? pipe and larger) minimum 450 PSI calcium silicate meeting ASTM C-656 Type II, Grade 5, C-795 and E-84
  • All units and components are asbestos-free and 100% made and assembled in the U.S.A.

Pro-Shield Thermal Hanger Shield

Pro-Shield Thermal Hanger Shield

Item Code: Pro Shield
Pro-Shields are 360° thermal hanger shields designed to meet the broadest range of pipe support applications. They provide a continuous section of insulation with factory-applied jacketing meeting ASTM E 96A (maximum 0.02 perm) through a wide variety of pipe hangers for pipe systems operating between +20° F. and +1200° F. The insulation and jacketing extend beyond the galvanized steel shield for a neatly sealed joint with the adjoining insulation. Pro-Shields are suitable for use in any type of clamp as well as in band-type hangers and on flat surfaces. To assure proper support in all situations, high-density 450 PSI inserts are installed in units for 10” pipe with 1” insulation thickness and in all units for 12” pipe and larger. Pro-Shields meet the MSS standard for a Type 40 shield per MSS SP-58, Paragraph 7.63 – 7.66. Pro-Shields Meet ASTM E84 Standards Flame Spread-5-, smoke developed-5-. Rounded shield corners on all commercial size units.

Applications
  • For indoor use on clamping support systems, flat surfaces, clevis or other band-type hangers (see WeatherShield Upgrade submittal for outdoor use).
  • Pipe sizes 16 inch and larger in clevis or two bolt hangers only.
  • Chilled to steam piping and dual temperature lines.
  • Hanger spans per MSS SP-58 Table A3.
  • Available for pipe 1/2 inch through 24 inches, insulation thickness 1/2 inch (to 6” pipe) through 4 inches.
  • Pro-Shield can be made to fit Aquatherm / Metric piping.

Materials/Construction
  • 100 PSI Calcium silicate meeting ASTM C-533 Type 1, C-585, C-795, E-84, Thermal Conductivity (‘k’)=.40 @ 75° F.
  • Adhesive complying with NFPA 90-A, ASTM E-84
  • G-90 Galvanized steel shield, small check per ASTM A-653 (replaces A-527). Rounded corners for safety.
  • Factory applied jacketing meeting ASTM E 96A (maximum 0.02 perm), ASTM D-774, D-828 and E-84,
  • Structural insert (12? pipe and larger) minimum 450 PSI calcium silicate meeting ASTM C-656 Type II, Grade 5, C-795 and E-84
  • All units and components are asbestos-free and 100% made and assembled in the U.S.A.
Image Item Code
Options
Full Description 1 + Qty.
Total {{ total }} products
show per page
SEARCH ×