Anvil #218 Beam Clamp
Material: Malleable iron jaw, steel tie rod, nuts and washer.
Finish: Plain or Zinc Plated
Service: Recommended for attachment to structural steel. Use in conjunction with beams where beam widths are from 2-3/8" minimum to 7" maximum and flange thickness does not exceed 0.60".
Approvals: Complies with Federal Specification A-A-1192A (Type 30), WW-H-171-E (Type 30), ANSI/MSS SP-69 and MSS SP-58 (Type 30). UL, ULC Listed (Sizes 3/4" - 12" pipe size, when used with the Fig. 157 extension piece 3/8" - 7/8" rod sizes). FM Approved (Sizes 3/4" - 4” pipe size, when used with the Fig. 157 extension piece 3/8" rod size).
Anvil #218 Beam Clamp
Material: Malleable iron jaw, steel tie rod, nuts and washer.
Finish: Plain or Zinc Plated
Service: Recommended for attachment to structural steel. Use in conjunction with beams where beam widths are from 2-3/8" minimum to 7" maximum and flange thickness does not exceed 0.60".
Approvals: Complies with Federal Specification A-A-1192A (Type 30), WW-H-171-E (Type 30), ANSI/MSS SP-69 and MSS SP-58 (Type 30). UL, ULC Listed (Sizes 3/4" - 12" pipe size, when used with the Fig. 157 extension piece 3/8" - 7/8" rod sizes). FM Approved (Sizes 3/4" - 4” pipe size, when used with the Fig. 157 extension piece 3/8" rod size).
| Image | Item Code |
Options
|
Full Description | 1 + | Qty. |
|---|
