Anvil #188 Pipe Strap
Item Code: Anvil 188
Size Range: 3/4" through 2"
Material: Carbon Steel
Finish: Pre-Galvanized per ASTM A653
Service:
- Hanger and surge restraint for horizontal CPVC piping when installed on the top, bottom, and side of the supporting structure.
- Guide for vertical CPVC piping when installed on the side of the supporting structure.
- Horizontal and vertical seismic restraint per NFPA 13-2016 requirements.
- Listed with hardware provided on structural wood beams and composite wood beams (1" minimum). Listed with steel (18ga minimum) with two (2) #14x1" or 1/4"x1" hex washer head self-drilling TEK screws. For wood structures with less than 1” thickness, wood blocks may be placed on the backside of the wood structure. #10x1" fastener provided must be fully engaged in the wood block.
- May be installed with concrete, steel structural members, and other structural members with fasteners which comply with the requirements of NFPA 13.
Approvals: cULus Listed
Category
Pipe & Tube Hangers
| Image | Item Code |
Options
|
Full Description | 1 + | Qty. |
|---|
Specifications
Brand
Anvil - ASC
Category
Pipe & Tube Hangers
